Title: How to Reset Bosch Dishwasher? (Full Guide for All Models)

To reset a Bosch dishwasher, press and hold the Start/Reset button for 3 to 5 seconds until the light fades or the display changes to “0:01”. Close the door and wait about a minute for the dishwasher to drain the residual water. Then press the On/Off button to finish the reset.

Why You Might Need to Reset a Bosch Dishwasher

There are several reasons why a Bosch dishwasher may need a reset. It could be stuck mid-cycle, beeping, or flashing an error code like E15. You might have accidentally selected a different cycle or want to cancel the wash early.

Sometimes the control panel stops responding, the child lock is engaged, or you need to clear residual water stuck at the bottom.

Soft Reset Method (All Models)

Here’s how to do a soft reset on most Bosch dishwashers:

1. Open the dishwasher door slightly to stop the current wash.
2. Press and hold the Start/Reset button (sometimes labeled “Reset 3 sec” or “Reset 4 Sec.”) for about 3-5 seconds.
3. Wait until the display shows 0:01 or the “Clean” indicator fades.
4. Close the door to let the machine drain water, which takes about one minute.
5. Once draining is done, press the On/Off button to finish the reset.

This method works across models like Bosch Series 1, Series 2, Series 4, and Silence Plus 50 dBA.

Hard Reset (Power Cycle)

If the soft reset doesn’t work, try a hard reset. This helps clear deeper issues or electrical problems.

1. Unplug the dishwasher from the wall or flip the circuit breaker.
2. Wait for about 5–10 minutes to allow the electrical charge to dissipate.
3. Plug the dishwasher back in or flip the breaker on.
4. Press the On/Off button and try to start a new cycle.

If the cord is wet or the machine is near standing water, use the breaker instead to avoid shock.

Troubleshooting Reset Problems

Sometimes a reset doesn’t work as expected. If your dishwasher is freezing, flashing all lights, or not responding, try these fixes:

• Ensure the door is fully closed and latched.
• Hold the Start/Reset button again until the lights fade.
• Check if child lock is active. Disable it by holding the lock or > button for 3–5 seconds.
• Perform a hard reset (power cycle).

Conclusion:

Knowing how to reset Bosch dishwasher models like Series 1, 2, 4, or Silence Plus 50 dBA helps you quickly fix issues. Whether it’s a stuck cycle, error code, or accidentally selected program, you can reset in under 5 minutes.

Always try the Start/Reset button, use Cancel & Drain, and if needed, disconnect power. These steps clear most glitches and get your dishwasher back to cleaning dishes fast.